IOGear M1102-a User Manual page 15

F1: GOTO
F1: GOTO
This function is to let you switch to a specific port
via port ID or port's name. Enter [1] to choose from
Port Name and [2] to choose from Port Number in
the yellow box locating in the bottom of the pink
bar.
If [1] was chosen, then type in the port's name that
you want to go to and then press [Enter]. You can
also move the red highlight bar to the specific port
that you want to go to and press [Enter].
28
F2: LIST
If [2] was chosen then you can go to a specific port
by entering the port ID. You can also move the red
highlight bar to the specific port that you want to
go to and press [Enter].
F2: LIST
This function allows you to choose a way that you
wish to list the ports in the OSD display on the
main screen. Simply move the red highlight bar
to the option that you wish to choose and press
[Enter]. You will see the hand symbol will be point-
ing at the option that you chose, then simply press
[Esc] to exit the function.
29