IOGear M1102-a User Manual page 18

Scan-Skip Mode
This function allows you to set the behavior in autoscan mode. Simply move the red highlight bar to the
behavior you want and press [Enter]. Then, press [Esc] to exit from this function.
Function Description
All Scan all ports that the
administrator has set as
accessible for the current logged
in user
Quick View Scan only the ports that have
been set as quick view ports
(This option will only show up for
administrator account)
Powered Scan only the ports that have
ON been powered on
Quick View Scan only the ports that have
+ Powered been set as quick view ports and
ON they have been powered on
34
Screen Blanker
This function allows you to set the time interval to
have the KVM goes to a black screen. Simply en-
ter the number between 0 to 30 and press [Enter];
then, press [Esc] to exit from this function.
Hotkey Command Mode
This function allows you to enable or disable the
hotkey commands. Simply press Y for yes and N
for no. Then, press [Esc] to exit from this function.
35