Hotkey Setting Mode (Hsm) - IOGear M1102-a User Manual

Hotkey Setting Mode (HSM)

Function Description
1. Press and hold [Num Lock] Invoking hotkey setting mode
2. Press and release [-]
3. Release [Num Lock] Note: To exit HSM manually, press Esc or spacebar.
Invoke HSM, then press [h] Change the HSM invocation keys from [Num Lock] to [Ctrl] and
from [-] to [F12]
Invoke HSM, then press [t] Switch port switching hotkey sequence between [Scroll Lock]
[Scroll Lock] and [Ctrl] [Ctrl]
Invoke HSM, then press [F1] Set keyboard operating platform to PC compatible
Invoke HSM, then press [F2] Set keyboard operating platform to Mac compatible
Invoke HSM, then press [F3] Set keyboard operating platform to Sun compatible
Invoke HSM, then press [F5] Perform keyboard / Mouse reset on the port that has KVM focus.
Note: You can also press and hold Port 1 and Port 2 front panel
push button to perform keyboard / mouse reset.
50
Invoke HSM, then press [←] Invokes Skip mode and skips from the current port to the first
accessible port previous to it
Invokes Skip mode and skips from the current port to the next
Invoke HSM, then press [→]
accessible port
Invoke HSM, then press [b] Toggle hotkey beepers on or off
Invoke HSM, then press [X*] [Y*] Switches KVM focus to the computer that is connected to Port X
[Enter] in the 1st Level and Port Y in the 2nd Level
Note: If you only have a single level installation, simply ignore the
Y interval
Invoke HSM, then press [r] [Enter] Restore default settings (Administrator ONLY)
Invoke HSM, then press [a] [Enter] Invoke Auto Scan Mode
or
Invoke HSM, then press [q] [Enter] Note: Auto Scan can be paused and resume by pressing [p] or
by a single left-click on the mouse
*Note: X and Y are intervals from 1-8 (for GCS1808) and 1-16 (for GCS1716). When you enter, please
make sure you enter each of them as a 2 digit number, for example, you would need to type 01 for port 1.
51