Chapter 1 - Overview - Garnet SEELEVEL II 709-RVC Manual

Rv tank monitor
Hide thumbs Also See for SEELEVEL II 709-RVC:
Table of Contents

Advertisement

CHAPTER 1 - OVERVIEW

T
he S
forward in level measurement technology for the Recreational
Vehicle industry. The S
accuracy, reliability, and diagnostic capability that have never
been available before.
Model 709-RVC will monitor the battery voltage, the fresh water
and sewer holding tanks and the LP gas tank. The 709-RVC is also
RV-C network compatible, the tank levels and alarms are available
on the RV-C bus for the fresh, grey, black and one LP tank. The
information is displayed on a 3-digit alpha-numeric LED display.
There is one alarm output available which can be used to signal
a high or low water or sewer level as required. In addition, the
system can display the operating characteristics of each of the
tank sending units, giving it unsurpassed diagnostic capability.
WARNING: All power circuits must be fused. If a fuse is not
W
provided with the system then it is the installer's responsibility to
install a fuse with a maximum rating of 7.5 amps.
For more detailed information please refer to Chapter 7
"TROUBLESHOOTING GUIDE" and section "How to avoid
damaging the display or pump switch due to excessive current".
709-RVC Manual
TM
L
L II
EE
EVE
Tank Monitor represents a massive leap
L
L™ has a combination of features,
EE
EVE
Page 3

Advertisement

Table of Contents
loading

Table of Contents