Garnet SEELEVEL II 709-RVC Manual page 19

Rv tank monitor
Hide thumbs Also See for SEELEVEL II 709-RVC:
Table of Contents

Advertisement

For single sender applications:
The sender ends should be
bottom of the tank, to allow for the thickness of the tank top and
bottom and any bows in them (see the diagrams). The senders
are calibrated to account for this distance from the bottom of the
tank. The SS sender is cut to the nearest even 2" in length. The
ES sender is cut to the nearest even 1.5" in length, for example,
for a system with a tank height of 11.75", cut the sender to be
10.5" long, this allows
vertically on the tank. The JS sender is cut to the nearest 1.0" in
length.
CAUTION: DO NOT cut the 710SS sender shorter than 6". This
W
sender will not work if it is cut shorter than 6". DO NOT cut the
710ES sender shorter than 4 1/2". This sender will not work if it is cut
less than 4 1/2". DO NOT cut the 710JS sender shorter than 4". This
sender will not work if it is cut less than 4".
For double stacked sender applications:
For tall tanks, two stacked 710ES or 710SS senders are used. The
sender ends should be
the tank, to allow for the thickness of the tank top and bottom and
any bows in them (see the diagrams). The senders are calibrated
to account for this distance from the bottom of the tank. In
addition, there needs to be a gap of
two senders. Therefore the total length of both senders will be:
tank height -
sender) or 2" (SS sender) . The top and bottom senders should be
approximately the same length for best results. For example, if the
tank height is 22", then 22"-
of both ES senders will be 21". Make both senders 10.5" long.
709-RVC Manual
Tank
Height
4
" - 5"
1/2
5" - 7"
7" - 13"
13" - 17"
17" - 25"
25" - 34"
" at each end when the sender is centered
5/8
1/4
"-
"-
", then rounded down to the nearest 1.5" (ES
1/4
1/4
1/8
Sender Options
Best Resolution
JS
JS
ES
stacked ES
stacked ES
stacked SS
" to
" away from the top and
1/4
3/4
" to
" away from the top and bottom of
3/4
1/16
"-
"-
"= 21
1/4
1/4
1/8
Other
Acceptable
-
ES
SS
SS
stacked SS
-
" to
" in between the
1/8
", so the total length
3/8
Page 19

Advertisement

Table of Contents
loading

Table of Contents