Table of Contents
Advertisement
CHAPTER 1 - OVERVIEW
T
he S
EE
forward in level measurement technology for the Recreational
Vehicle industry. The SeeLeveL has a combination of features, accuracy,
reliability, and diagnostic capability that have never been available
before.
Garnet's 709-N2K series models will monitor the battery voltage,
and the fresh water and sewer holding tanks. The information is
displayed on a 3-digit alpha-numeric LED display. The 709-N2KP
includes a pump switch. The 709-N2K series is also NMEA 2000
network compatible, the tank levels and capacity are available on the
NMEA bus for the fresh, grey, and black tanks. There is one alarm
output available which can be used to signal a high or low water
or sewer level as required. In addition, the system can display the
operating characteristics of each of the tank sending units, giving it
unsurpassed diagnostic capability.
WARNING: All power circuits must be fused. If a fuse is not
W
provided with the system then it is the installer's responsibility to install
a fuse with a maximum rating of 7.5 amps. A relay is required if more
than 7.5 amps is needed for the pump.
For more detailed information please refer to Chapter 7
"TROUBLESHOOTING GUIDE" and section "How to avoid damaging
the display or pump switch due to excessive current".
709-N2K NLP/709-N2KP NLP Manual
TM
L
L II
EVE
Tank Monitor represents a massive leap
Page 3
Hide quick links:
Advertisement
Table of Contents
