Settings Step By Step; Counters (Menu 0) - Animo ComBi line CB 1x10 Manual

How can you go through the menu and activate a function?
1. Move the arrow to the required menu item using the selection buttons
2. You activate the required menu by using the START button
3. By pressing the STOP button
How can you confirm a change?
You confirm a change by pressing the START button
How can you close the operator menu?
1. Press the STOP button
2. Check if the changed settings are as required. If the settings are not as required,
follow the procedure again.
While you are in the settings menu the appliance will not fill or heat up.
12.

SETTINGS STEP BY STEP

12.1

Counters (Menu 0)

PIN Counters then select counter item
An overview of all counter functions follows in the display.
At the top of the display is a navigation bar on which the
selected menu item number is shown.
Menu Explanation of Counter items
0.0 Daily counter of coffee made in litres
0.1 Reset daily counter of coffee made
0.2 Total counter of coffee made in litres
1. Select the required counter, and confirm with the
START button .
2. Read the counter reading or reset the counter as
required.
05/04
you go back to the previous screen without saving the changes made.
. You will hear a short beeping sound.
until the user menu reappears.
67
.
.
Counter menu Fig. 14
ComBi line