Sam/Tf Cards; Installing Or Changing Sam/Tf Card - VeriFone P630-2 Installation Manual

WARNING

SAM/TF Cards

CAUTION
Installing or
Changing SAM/TF
Card
3
Remove the clear protective film from the display.
4
Save the shipping carton and packing material for future repacking or moving
of the device.
Do not use a tampered or damaged unit. The unit comes equipped with tamper-
evident labels. If a label or component appears damaged, please notify the
shipping company and your Verifone service provider immediately.
You may need to install one or more security access module (SAM) cards or
replace the old cards.
To install or replace SD card:
1
Turn off the terminal.
2
Place the terminal face down on a soft and clean surface.
3
Remove cable cover as shown in
4
Insert the card into the slot.
Figure 2 SAM/TF Slots
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharges can damage the equipment. Verifone recommends using
a grounded anti-static wrist strap.
To install or change TF or SAM card:
1
Place the terminal face down on a soft and clean surface to protect the lens
from scratches.
2
Release the screw.
3
Slide out and lift the compartment cover. The TF and SAM cardholders are
now accessible.
Figure 2.
P630-2 I
S
ETUP
SAM/TF Cards
14
G
NSTALLATION UIDE