Table of Contents
Advertisement
Field
Password
Scan Interval
Timeout
Web URL
Login Name
Login Password
3. When you have finished configuring the fields, click Next to bring up the
dialog box with the Step 2 tab displayed.
4. The Step 2 dialog presents a summary of the blade server's configuration,
including the number of blades installed. Click Save to add the blades
server to the installation.
Modifying / Deleting a Blade Server
To modify a blade server's configuration, first select it in the Sidebar, then
click Modify. Make your changes on the Setup Blade Server dialog box.
To remove a blade server, first select it in the Sidebar, then click Delete.
Web Access
To access the blade server's Web page, first select it in the Sidebar, then click
Access Web.
Key in the password required for serial access authentication.
The interval between times that the KVM over IP switch scans
the server for information.
The amount of time that the KVM over IP switch waits for a
response from the server before it stops scanning for
information.
Key in the server's IP address (IPv4, IPv6, or domain name)
used to access the server via a browser.
Key in the username required for browser authentication.
Key in the password required for browser authentication.
Chapter 8. Device Management
Explanation
211
Advertisement
Table of Contents
