Table of Contents
Advertisement
KVM over IP User Manual
3. Make your permission settings for each port according to the information
provided below:
Name: Each port accessible to the user is listed under the Names
Access: The Access column is where device access rights are set.
USB: The USB column is where USB Virtual Media device
Config: The Config column is where a user's permission to make
PON: The PON column permits/restricts the configuration and
172
column.
Click the icon in the row that corresponds to the port you
want to configure to cycle through the choices. The
meanings of the icons are described in the table below:
Full Access
View Only
No Access
access rights are listed. This entry does not appear for
switches that do not support the USB Virtual Media
function. Click the icon in the row that corresponds to the
port you want to configure to cycle through the choices.
Full Access means that the User can mount, read, and write
the virtual media; View Only means that the user can only
read already mounted virtual media data.
changes to a port's configuration settings are permitted/
restricted. Click the icon in the row that corresponds to the
port you want to configure to cycle through the choices.
√
A check mark (
) indicates that the user has permission
to make changes to the port's configuration settings; an X
means that the user is denied permission to make
configuration changes.
power operation of ports that have Power Over the Net™
devices connected to them. A check mark (
that the user has permission; an X means that the user does
not have permission.
The user can view the remote screen
and can perform operations on the
remote server from his keyboard and
monitor.
The user can only view the remote
screen; he cannot perform any
operations on it.
No access rights - the Port will not show
up on the User's list on the Main Screen.
√
) indicates
Advertisement
Table of Contents
