Table of Contents
Advertisement
3. Enter the required information in the appropriate fields. A description of
each of the fields is given in the table below:
Field
Group Name
Description
Permissions
4. At this point you can assign users to the group by selecting the Members
tab – the Members page is discussed on page 169. You can also assign the
group's port access rights by selecting the Devices tab – the Devices page
is discussed on page 171.
Note: Optionally, you can skip this step now to add more groups and
assign users to them, and come back to it later.
5. When your selections have been made click Save.
6. When the Operation Succeeded message appears, click OK.
7. Click Group in the Sidebar to return to the main screen. The new group
appears in the Sidebar Group list and in the main panel.
The Sidebar Group list can expand and collapse. If the list is expanded,
click the minus symbol ( – ) next to the Users icon to collapse it; if it is
collapsed there is a plus symbol ( + ) next to the icon. Click the plus
symbol to expand it.
The large main panel shows the group's name, and the description that
was given when the group was created (the Status column is inactive).
Repeat the above procedure to add additional groups.
Note: You must perform Step 7 before attempting to add a new group, or else
the new group you are creating will replace the group you just finished
creating.
Description
A maximum of 16 characters is allowed.
Additional information about the user that you may
wish to include. A maximum of 63 characters is
allowed.
Permissions and restrictions for groups are set by
checking the appropriate boxes. These are the same
permissions as the ones specified for Users. See
Permissions, page 161 for details
Chapter 7. User Management
165
Advertisement
Table of Contents
