Table of Contents
Advertisement
KVM over IP User Manual
Field
Status
4. At this point you can assign the new user to a group by selecting the
Groups tab – the Groups page is discussed on page 167. You can also
assign the user's port access rights by selecting the Devices tab – the
Devices page is discussed on page 171.
Note: Optionally, you can skip this step now to add more users and create
groups, and come back to it later.
5. When your selections have been made click Save.
6. When the Operation Succeeded message appears, click OK.
162
Status allows you to control the user's account and access
to the installation, as follows:
Disable Account lets you suspend a user's account
without actually deleting it, so that it can be easily
reinstated in the future.
If you don't want to limit the time scope of the account,
select Account never expires; if you do want to limit the
amount of time that the account remains in effect, select
Account expires on, and key in the expiration date.
To require a user to change his password at the next
logon, select User must change password at next logon.
This can be used by the administrator to give the user a
temporary password to log in for the first time, and then let
the user set the password of his choice for future logins.
To make a password permanent, so that the user cannot
change it to something else, select User cannot change
password.
For security purposes, administrators may want users to
change their passwords from time to time.
If not, select Password never expires. This allows
users to keep their current passwords for as long as
they like.
If so, select Password expires after, and key in the
number of days allowed before the password expires.
Once the time is up, a new password must be set.
Description
Advertisement
Table of Contents
