Chroma Studio One 100 D User Manual page 12

3-Look Store
In this mode,
5 internal preset Looks are available for stand-alone operation (see No DMX Present).
•
Looks created from an external DMX console can be recorded in any of the 5 Look numbers and will be
•
preserved on power down.
Looks that have been recorded can be modified in stand-alone operation.
•
Looks will be returned to default setting if reset is performed.
•
To recall a Look in stand-alone operation,
1. From the Main Menu, press Up Up Up Up or Down
2. Press Enter Enter and press Up Up Up Up or Down
Enter Enter
3. Press Enter Enter after the display shows Recall?
Enter Enter
4. Press Up Up Up Up or Down
5. Press and hold Enter
To record a Look created from a remote DMX console:
1. Set the fixture to the desired Personality.
2. Use an external DMX console to adjust the assigned channel levels and create the desired look or effect.
3. From the Main Menu, press Up Up Up Up or Down
4. Press Enter Enter, press Up Up Up Up or Down
Enter Enter
5. Press Enter Enter to record the Look and the display shows Recorded.
Enter Enter
To create or modify a Look in stand-alone operation:
1. From the Main Menu, press Up Up Up Up or Down
2. Press Enter Enter, press Up Up Up Up or Down
Enter Enter
3. Press Enter Enter and the display shows "I" (Intensity) at the top row and the value below. Enter Enter
4. Press Up Up Up Up or Down
5. Press and hold Enter
Studio One 100 D User Manual
Down Down to access 3-Look Store. Down
Down to select from Look 1 to 5.
Down Down
Down to increase or decrease the intensity "I I I I " from 0 to 100. Down Down
Enter Enter Enter to save the Look, the display shows Recorded and the Look turns On.
Down Down to select 3-Look Store. Down
Down to select the Look number and the display shows Record?
Down Down
Down to select 3-Look Store.
Down Down
Down to recall the Look number.
Down Down
Down Down Down to increase or decrease the Intensity value.
Enter until the display shows Recorded.
Enter Enter
www.chroma-q.com
11 V1.0 September 2015