Table of Contents
Advertisement
NOTE:
When the Platform/Ground Select Switch is in the center posi-
tion, power is shut off to the controls at both operating consoles.
Remove the key to prevent the controls from being actuated.
4. Platform/Ground Select Switch
The three position, key operated switch sup-
plies power to the platform control console
when positioned to PLATFORM. With the
switch key turned to the GROUND position
only ground controls are operable.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANTS TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
3121670
SECTION 3 - MACHINE CONTROLS AND INDICATORS
5. Platform Leveling Override
A three position switch allows the operator to
adjust the automatic self leveling system. This
switch is used to adjust platform level in situa-
tions such as ascending/descending a grade.
6. Platform Rotate
Provides rotation of the platform.
7. Jib Lift (If Equipped)
Provides raising and lowering of the jib.
3-7
Advertisement
Table of Contents
