Table of Contents
Advertisement
7. Fuel Level Indicator
Indicates the level of fuel in the tank.
Figure 3-13. Fuel Level Indicator
3121670
SECTION 3 - MACHINE CONTROLS AND INDICATORS
8. Creep Speed Indicator
When the Function Speed Control is turned to
the creep position, the indicator acts as a
reminder that all functions are set to the slow-
est speed. The light will be on continuously if the operator
selects creep speed or if the control system puts the
machine into creep speed. In addition, if the control system
puts one or more individual functions in creep speed, the
indicator flashes when that function is selected.
9. System Distress Indicator
The light indicates that the JLG Control System
has detected an abnormal condition and a
Diagnostic Trouble Code has been set in the
system memory. Refer to the Service Manual for instructions
concerning the trouble codes and trouble code retrieval.
10. Drive Orientation Indicator
When the boom is swung beyond the rear
drive tires or further in either direction, the
Drive Orientation indicator will illuminate
when the drive function is selected. This is a signal for the
operator to verify that the drive control is being operated in
the proper direction (i.e. controls reversed situations).
3-25
Advertisement
Table of Contents
