Received Data Output Mode; Network Node Types - Ebyte E180-Z5812SP Product Manual

Chengdu Ebyte Electronic Technology Co., Ltd.

6.6.2 Received data output mode

Read instruction format:
command format
send： FE 01 27 FF
return： FB 27 out_mode
Configuration instruction format:
command format
send：FD 01 27 mode FF
return：FA 27
mode：
Note: When the dormant terminal device receives data, it does not support parsing the long address of the source device. When the
terminal device receives data, it can resolve the long address of the source sending device such as the coordinator, router, and terminal,
but the coordinator and router cannot resolve the source sending device of the terminal. long address. The coordinator and router here
are E180-Z8910SX/P products.
Note: The sender supports a single packet with a maximum packet length of 72 bytes

6.6.3 Network Node Types

Read instruction format:
command format
send： FE 01 01 FF
return： FB 01 dev_type
Configuration command format：
command format
send：FD 01 01 dev_type FF
return：FA 01
dev_type：
0x03 Terminal (default)
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co., Ltd.
0x05 Protocol multicast (the first byte in transmission mode is the target network group number);
0x00 Transparent transmission (default);
0x01 Data + short address;
0x02 Data + long address;
0x03 Data+RSSI;
0x04 Data + short address + RSSI;
0x05 Data + long address + RSSI;
0x04 Sleep terminal
command example
send： FE 01 27 FF
return： FB 27 00
command example
send：FD 01 27 00 FF
return：FA 26
command example
send： FE 01 01 FF
return： FB 01 03
command example
send：FD 01 01 03 FF
return：FA 01
E180-Z5812SP Product Manual
21