Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd.
Remote Header:
0x0000 Indicates that the wireless network configuration is closed，0x0001～0xFFFF Indicates that remote
configuration is turned on，The default setting is 0xA88A(0xA8 0x8A)。
6.6.19 User gpio parameters
Read instruction format:
command format
command： FE 03 20 GpioId FF
return： FB 20 GpioId In/Out level
Configuration command format：
command format
command：FD 03 20 GpioId In/Out level FF
return：FA 20
Format of gpio peripheral configuration data (3 Byte): GpioId In/Out level.
gpioid : channel ID
In/Out: Channel output/input mode
0 output
1 input
level: The level status of the channel
0 low level
1 high level
2 turn over
Note: When configured as an input, level indicates the input level value 0 (low level) or 1 (high level), when configured as an
output, level indicates 0 (low level), 1 (high level), 2 (electrical level) flat flip) output.
6.6.20 User pwm parameters
Read instruction format:
command format
command： FE 06 21 PWMId FF
return： FB 21 PWMId start/stop
Period Period duty duty
Configuration command format：
command format
command：FD 06 21 PwmId start/stop
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co., Ltd.
channel ID
00
01
command example
send： FE 03 20 00 FF
return： FB 20 00 01 01
command example
send：FD 03 20 00 01 01 FF
return：FA 20
GPIO port
PC0 port
PB4 port
command example
send： FE 06 21 00 FF
return： FB 21 00 01
0A 3E 63 50
command example
send：FD 06 21 00 FF 03 65 02 48 FF
E180-Z5812SP Product Manual
28
Advertisement
Table of Contents
