Configure The Trust Center Connection Key - Ebyte E180-Z5812SP Product Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
send： FE 05 37 FF
return： FB 37 Endpoint_info
Configuration command format：
command format
send：FD 05 37 Endpoint_info FF
return：FA 37
Endpoint_info：The length data format of 5 bytes is endpoint clusterId_H clusterId_L profileId_H profileId_L
Default parameters endpoint 0x01, clusterId 0xfeb0, profileId 0x0504。
01

6.6.27 Configure the trust center connection key

Read instruction format:
command format
send： FE 10 38 FF
return： FB 38 TrustCentLinkKey
Configuration command format：
command format
send：FD 10 38 TrustCentLinkKey FF
return：FA 38
TrustCentLinkKey： 16 bytes in length, the default value is the default key of the ZigBee Alliance, and its value is
Note: Only the network-connected device holds the same connection key (LinkKey) as the trust center (coordinator) to connect to the
network of the trust center (coordinator), and the trust center (coordinator) transmits the network key to the network-connected device ,
the network access device completes the process of joining the network to obtain the network key for normal communication.
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co., Ltd.
endpoint clusterId
clusterId_H
FE
command example
send：FD 10 38
return：FA 38
0x5A 0x69 0x67 0x42 0x65 0x65 0x41 0x6C
0x6C 0x69 0x61 0x6E 0x63 0x65 0x30 0x39
The device restarts to take effect.
send： FE 05 37 FF
return： FB 37 01 FE B0
05 04
command example
send：FD 05 37 01 FE B0
05 04 FF
return：FA 37
profileId
clusterId_L profileId_H
B0 05
command example
send： FE 10 38 FF
return： FB 38
5A 69 67 42 65 65 41 6C
6C 69 61 6E 63 65 30 39
5A 69 67 42 65 65 41 6C
6C 69 61 6E 63 65 30 39
FF
E180-Z5812SP Product Manual
profileId_L
04
32