Hex Parameter Description; System Sending Mode - Ebyte E180-Z5812SP Product Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
open network
Leave network
Create new network
Open network: The main coordinator node takes effect, indicating that the open network allows terminals to join for a period of time,
and the command configures the "centralized network opening time" parameter. This command is invalid for terminals and dormant
terminals, and only the coordinator node (E180-Z8910SX/P) is valid.
Leave network: The coordinator executes this command to clear the original network and create a new network at the same time. The
terminal node executes this command to clear the saved network, and then executes the restart or create a new network command to
join the new network.
Create a new network: mainly for terminals, execute this command to join a new network, you need to leave the network first and then
execute a new network to join a new network.

6.6 HEX parameter description

6.6.1 System sending mode

Read instruction format:
command format
send： FE 01 26 FF
return： FB 26 send_mode
Configuration instruction format:
command format
send：FD 01 26 mode FF
return：FA 26
mode：
configuration mode first);
configuration mode first);
address of the target device);
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co., Ltd.
send：F5 01 40 01 FF
return：FC 40 00
send：F5 01 40 02 FF
return：FC 40 00
send：F5 01 40 03 FF
return：FC 40 00
0x00 broadcast (default);
0x01 Multicast (you need to configure the target group number in configuration mode first)
0x02 Transparent transmission on-demand + short address (you need to configure the target short address in
0x03 Transparent transmission on-demand + long address (you need to configure the target long address in
0x04 Protocol on demand + short address (the first two bytes in the transmission mode are the short network
send：F5 01 40 01 FF
return：FC 40 00
send：F5 01 40 02 FF
return：FC 40 00
send：F5 01 40 03 FF
return：FC 40 00
command example
send： FE 01 26 FF
return： FB 26 02
command example
send：FD 01 26 02 FF
return：FA 26
E180-Z5812SP Product Manual
20