Cleaning With The Hose And Tools - Bissell REVOLUTION HYDROSTEAM 3672E Manual

Cleaning with the Hose and Tools

Tools vary by model.
Note: Only water and formula flows through hose and tool, not steam.
Attaching the Hose
1. Lift accessory hose door
on top of foot on the front
of machine. Flip door toward
machine to open.
8cm and 15cm Tool
1. Point tool above spot or
stain and press spray trigger.
3-in-1 Stair Tool
1. Twist tool to desired
position. The downward facing
edge is the active cleaning
mode.
2. Insert hose until it clicks into
place. Be sure colored hose
release clip is facing out, away
from machine.
Attach tool to end of hose.
2. Release spray trigger and
gently scrub the stain.
a
c
b
2. Use to clean stairs three ways:
a. Flat edge: stair tread
b. Indented area: outer corner
c. Pointed edge: inner corner
3. Point tool about 2 cm above
stain and press trigger. Suction
stain by placing tool on surface
and slowly moving backwards.
global.BISSELL.com 7