5.2 PC Connection
Note
For details about connecting a switching hub to the PBX, refer to "4.11.1 LAN Connection for the Main
Unit".
Connection via Internet
PC
CAUTION
It is strongly recommended to use SSL encrypted communication when the PC is accessing the PBX via
the Internet. To use SSL encryption, routers must have a port set up for https communication.
Notice
To access the PBX via the internet, routers must have static NAT/NAPT settings (Port forwarding) enabled.
Note
For details about connecting a switching hub to the PBX, refer to "4.11.1 LAN Connection for the Main
Unit".
Connection via RMT Card (KX-TDA0196)
Analogue MODEM
PC
To connect a PC to the KX-NS300
1.
Start Off-line WebMC launcher.
2.
Click the Connect-Online Mode(C) button.
3.
Select Modem tab.
4.
Set following.
–
Dial Number
–
Dial NumberType
–
Port
154
Installation Manual
Router
Internet
LAN
Router
Analogue Line
Network
LAN Port
Switching Hub
RMT Card (KX-TDA0196) is Installed
in KX-NS300.