Checking The Oil Separator Hose; Checking The Antifrost Heater For Oil Separator (If Equipped); Checking The Dpf Differential Pressure Sensor Pipe; Checking The Egr Pipe - Kubota L3302 Operator's Manual

SERVICE EVERY 1 YEAR
• Be sure to stop the engine and remove the
starter key before checking the oil-cooler line.
1. Check to see that all lines and hose clamps are
tight and not damaged.
2. If hoses and hose clamps are found worn or
damaged, replace or repair them at once.
(1) Oil cooler

6. Checking the oil separator hose

1. Check to see that all hoses and hose clamps are
tight and not damaged.
2. If hoses and hose clamps are found worn or
damaged, replace or repair them at once.
[Standard type]
(1) Drain hose
L3302,L3902
(2) Oil cooler line
(2) Hose clamps
[Canada type]
(1) Drain hose
7. Checking the antifrost heater for
oil separator (if equipped)
Consult your local Kubota Dealer for checking the
antifrost heater for oil separator.
8. Checking the DPF differential
pressure sensor pipe
Consult your local Kubota Dealer for checking the DPF-
differential pressure-sensor pipe.

9. Checking the EGR pipe

Consult your local Kubota Dealer for checking the EGR
pipe.

10. Checking the relief valve

1. Check the breather tube for crack and gas leakage
and replace them if necessary.
2. Before winter, check the hoses for crack and the
hole of the breather tube for any foreign object
stuck in it, and replace them if necessary.
(1) Relief valve
(2) Breather tube
PERIODIC SERVICE
(2) Hose clamps
125