OPERATING THE TRACTOR
3. After the tractor has stopped, push the PTO clutch-
control switch to disengage the PTO clutch.
(See PTO clutch control switch [HST type] on page
78)
(1) PTO clutch control switch
4. Lower the implement to the ground.
(See Position control of 3-point hitch mounted
implement on page 85)
(1) Position control lever
5. Shift the transmission to the "NEUTRAL" position.
(See Range gear shift lever (L-M-H) [HST type only]
on page 43)
70
(A) On (engage)
(B) Off (disengage)
(A) Float
(B) Down
(C) Up
(1) Range gear shift lever (L-M-
H)
6. Set the parking brake.
(See Setting the parking brake on page 39)
(1) Brake pedal
CHECK DURING DRIVING
1. Cases to stop the engine
immediately
Immediately stop the engine if the following occurs:
• The engine suddenly slows down or accelerates.
• Unusual noises suddenly are heard.
• Exhaust fumes suddenly become very dark.
2. Easy Checker
If trouble should occur at any location while the engine
is operating, the warning-indicator lamp in the Easy
Checker corresponding to that location comes on.
If the warning-indicator lamps in the Easy Checker
come on during operation of the tractor, immediately
stop the engine, and find the cause as the following
table.
Never operate the tractor while the warning-indicator
lamps in the Easy Checker is "ON."
CHECK DURING DRIVING
(A) High
(B) Neutral position
(C) Middle
(D) Low
(2) Parking brake lever
L3302,L3902