Table of Contents
Advertisement
Overview
3-1
Overview
The main procedure for operating in the Auto Menu mode con-
sists of only five steps. These steps are outlined below and
described in more detail in the remainder of Section 3.
16
1
An image of the measurement object is displayed on the
video monitor.
For details about optional functions refer to 3-7 Optional
Functions. → p. 29
• The shutter speed can be adjusted in accordance with the
speed of movement for the measurement object (shutter
speed).
• Edges can be enhanced and the influence of noise can be
reduced (filtering).
• Background patterns can be cut (background suppres-
sion).
2
Images of acceptable (OK) and unacceptable (NG) prod-
ucts are registered so that measurement conditions can be
set automatically. These are called sample images.
3
Measurement conditions are set automatically using the
registered sample images from step 2.
• Measurement regions can be drawn in desired positions,
enabling measurement that is focussed on particular
areas.
• When measuring objects in almost exactly the same posi-
tion (i.e.: the objects are positioned), processing time can
be reduced by turning OFF the position compensation
function.
4
Measurement conditions are checked to ensure that proper
measurement is possible under the measurement condi-
tions set in step 3.
5
Actual measurements are performed according to the set
measurement conditions.
Section
3-1
Advertisement
Chapters
Table of Contents
