Table of Contents
Advertisement
44
ENGINE OPERATION
1. Perpendicular to the water surface
ENOM00053-0
Improper trim angle (bow rises too
high)
Set the thrust rod lower if the bow of the
boat rises above horizontal.
7
ENOM00054-0
Improper trim angle (bow dips into the
water)
Set the thrust rod higher if the bow of
the boat is below horizontal.
1
ENOF00051-1
1. Thrust rod
2. Higher
3. Lower
Trim angle adjustment
The transom angle adjustment
1. Stop the engine.
2. Shift into neutral position.
3. Tilt up the outboard motor.
4. Remove the thrust rod as shown pic-
ENOF00052-0
1. Push in
2. Rise the stopper
3. Pull out
ENOF00053-0
5. Reinstall the thrust rod in the desired
6. Gentry tilt down the outboard motor.
2
ture.
3
2
position securely.
1
3
ENOF01724-0
1
ENOF01238-1
Advertisement
Table of Contents
