Table of Contents
Advertisement
34
ENGINE OPERATION
(For manual starter type)
4. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it
quickly. Repeat the procedure until
the outboard motor is started.
1. Slowly
2. Quickly
3. Starter handle
7
(For electrical starter type)
4. Push the starter switch button and
release the button when the engine
has started.
1
1. Starter switch button
ENOW00032-0
Do not keep turning starter motor for over 5
seconds, or the battery may be consumed,
potenti ally making the engine star ting
impossible and/or damaging the starter.
1
2
3
ENOF00519-0
ENOF01753-1
CAUTION
If cranking over 5 seconds fails to star t
engine, return main switch to "ON", and
crank engine again after 10 seconds or more.
5. Return the choke knob fully after
engine has started.
6. Make sure that water is being dis-
charged from the cooling water check
port.
2
1. Cooling water check port
2. Idle port
Side mount RC type
1. Be sure to install the stop switch, and
a t t a ch th e sto p switch lanyard
securely to the operator or to the
operator's PFD (Personal Flotation
Device.)
1
1. Stop switch lock
2. Insert the main switch key.
1
ENOF01715-0
ENOF00869-1
Advertisement
Table of Contents
