Other Additives; Handrail Maintenance; Troubleshooting - Display Messages - Sundance Spas 880 Series Owner's Manual

880 Export Series
14.5

Other Additives

Many other additives are available for your hot tub. Some are necessary
to compensate for out-of-balance water, some aid in cosmetic water
treatment and others simply alter the feel or smell of the water. Your
Authorized Sundance Spas dealer can advise you on the use of these
additives.
14.6

Handrail Maintenance

The handrails in your Sundance hot tub are manufactured from a high
quality 316 stainless steel alloy. Many people are familiar with the term
"stainless steel" and are surprised to learn that it does indeed rust and
corrode in the presence of chloride salts, free chlorine, or sulfide gasses.
The bad news is the environments that produce these elements are
ocean spray, salted highways, chemical treatments added to swimming
pools and hot tubs, and ground water in numerous coastal areas. The
good news is with proper care, your hot tub's handrails can maintain their
original finish.
If your stainless handrails shows signs of rusting you should:
• Wash with fresh water (a good detergent won't hurt).
• Clean with a good car chrome polish.
• Wax with an automotive or fiberglass wax.
You should never:
• Clean with chlorinated cleaners or scouring powders.
• Use sand paper, "Scotch Brite", Brillo pads, or similar abrasive products.
• Clean with muratic or hydrochloric acids. Vinegar is ok, but it won't
do much to remove rust.

15.0 Troubleshooting - Display Messages

There are a number of unique functions designed into your
Sundance hot tub to protect it from damage and/or to aid in
troubleshooting. The indicator light located on the front cabinet
panel of the spa is an early detection system that will notify
you when the spa needs immediate attention. A solid white
light indicates that all operations are normal. A solid red light indicates
that immediate attention is required to clear or fix an error code.
Following is a listing of all the possible messages along with their
meanings. Always insist on genuine Sundance replacement parts.
Open Flow Switch
The flow switch is malfunctioning open.
Heater is disabled. The circ pump's filter
is dirty, or an air lock has occurred at
the pump intake. Refer to owner's
manual for additional information.
58
102 °