Other Additives - Sundance Spas MARIN 880 Series Owner's Manual

Hide thumbs Also See for MARIN 880 Series:
Table of Contents

Advertisement

880 Series
11. Reinstall and hand tighten the quartz seal compression nut (5) by
turning it clockwise.
12. Refill your spa.
13. System Test 1: Assure there is no water dripping from the seal
compression nut (5). If water is visible, STOP and tighten the
compression nut (5) using a pair of channel lock pliers to a maximum
of 1/4 turn. If that does not fix the leak, then repeat quartz tube
maintenance process from step 1 through step 12. Make sure there
is no water leaking before proceeding to step 14.
14. System Test 2: Reconnect the CLEARRAY unit to the controller.
Turn breaker back ON. Turn on the pump to circulate the water
through the CLEARRAY System. Wait for 5 minutes and assure no
water is dripping. If water is visible, STOP, fix the leak by repeating
quartz tube maintenance process from step 1 through step 13. Make
sure there is no water visible. Turn the pump and breaker OFF
BEFORE proceeding to step 15.
15. Reconnect the UV bulb socket (7) to the power cord socket (11)
make sure you use the latex glove provided when handling the UV
bulb.
WARNING:
YOUR BARE HAND. Oil on your skin will cause hot spot on
!
the UV bulb and shorten the life of your UV bulb. Use the
provided latex glove to handle the UV bulb.
16. Slide the new UV bulb (3) back inside the quartz tube.
17. Reinstall the black bulb boot (6) back over the quartz seal
compression nut (5).
18. Reinstall the enclosure cover (9) with gasket (8) and secure with the
screws.
19. Properly dispose of the old UV bulb.
WARNING:
!
which contains mercury. Dispose of the bulb in accordance
with disposal laws. See www.lamprecycle.org.
20. Once power is activated you can check the ballast
(12), Figure 8, to see if the CLEARRAY System is
functioning; it has two LED indicator lights the green
indicating incoming power flow and the red indicating the
system is properly working.
14.5

Other Additives

Many other additives are available for your hot tub. Some are necessary to
compensate for out-of-balance water, some aid in cosmetic water treatment
and others simply alter the feel or smell of the water. Your Authorized
Sundance Spas dealer can advise you on the use of these additives.
80
DO NOT TOUCH THE NEW UV BULB WITH
This CLEARRAY System includes a UV bulb,
FIGURE 8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Capri 880 series

Table of Contents