Sundance Spas 880 Series Owner's Manual page 67

PROBLEM PROCEDURE
Poor jet 1.
action
2.
3.
4.
5.
Water is too 1.
hot
2.
No heat 1. Check thermostat setting.
2. Keep the cover in place while heating.
3. If "heater on" indicator is on but no temperature rise
Filter/ 1. Verify filter/circulation pump is programmed to run 8
circulation
pump off 2. Hot tub water is warmer than 35°C (95°F) and 1°C
Should checking the above steps fail to correct the problem, please call
your authorized dealer so that he may arrange service.
Sundance builds the best hot tubs in the industry. Nonetheless, we are
always striving to improve the quality and features of our products. Your
input as a Sundance hot tub owner is a cherished part of this process. If
you have any comments or suggestions, or if you wish to be informed on
any new products for your hot tub, please write to us.
CONGRATULATIONS on your good taste and welcome to the happiest
and most relaxed family in the world!
Make certain the jets pump is turned on.
Check position of massage selectors.
Open air control for selected jet system.
Check for adequate water level.
Check for dirty filter (pages 46-48).
Reduce thermostat setting (page 20).
Switch hot tub to "Economy" mode to turn heater on
only during programmed filter cycles (page 36).
is experienced after a reasonable period of time, con-
tact your Sundance Spas dealer or qualified service
technician.
hours a day (page 37).
warmer than the set temperature. The "Summer
Logic" safety feature has activated.
880 Export Series
63