Sundance Spas 880 Series Owner's Manual page 44

880 Export Series
A. Programming the CLEARRAY® UV Bulb Timer
The CLEARRAY UV bulb has a life expectancy
of 1 year. A timer activates when power is
applied and begins a countdown starting at 365
days. Once the timer expires, an error message
will appear on the display, the UV bulb must
be replaced and the timer needs to be reset.
Tap
CLEARRAY
Programming Menu.
Note:
• The days are stored in memory if the power is interrupted.
• The CLEARRAY UV timer counts down by days not usage.
1. From the "Water Care" Menu you can to set the CLEARRAY UV bulb
timer, Figure 12.6c.
2. Tap or
is from OFF to 365 days. It is not recommended that this feature
be turned OFF. In order to continually have the CLEARRAY system
effectively preform its function, it should be program as instructed.
Note: Pressing
revert to the previous programmed setting. This feature can be used to
make corrections.
3. Tap to confirm and save your changes.
4. Tap to return to the "Water Care" Menu. Tap again to return to the
Settings Menu.
5. When the timer expires, a message will appear on the control panel
display. The CLEARRAY UV bulb must be replaced (page 54)
and the timer must be reset. Tap "reset" and follow the instructions
above to reset the timer. If you tap "snooze" the message will
clear but the error icon
reappear in 10 days.
B. Programming the Water Refresh Timer
A programmable "Water Refresh" reminder can
be set to remind you when to drain and refill the
spa. Tap
Water Refresh
the Programming Menu.
1. From the "Water Care" Menu you can to set
the "Water Refresh" timer, Figure 12.6d.
2. Tap or
increments. The range is from OFF to 180 days. It is not
recommended that this feature be turned OFF. In order to continually
maintain the water healthy and clean, in addition to chemical
maintenance, it should be program as instructed.
Note: Pressing
revert to the previous programmed setting. This feature can be used to
make corrections.
3. Tap to confirm and save your changes.
40
(Figure 12.6c) to enter the
65
to change the days in 10-day increments. The range
will clear any current changes made. The days will
will display and the reminder screen will
(Figure 12.6b) to enter
60
to change the days in 30-day
will clear any current changes made. The days will
CLEARRAY
A
A
65 Days Left 65
days
Figure 12.6c
A Water Refresh
A
60 Days Left 60
days
Figure 12.6d