Tower Installation; Rack Installation - HPE R/T2200 G4 User Manual

3. Installation

3.3 Tower installation

M3 screws

3.4 Rack installation

Warning: To reduce the risk of personal injury or damage to the equipment, be sure that:
• The leveling feet are extended to the floor.
• The full weight of the rack rests on the leveling feet.
• The stabilizing feet are attached to the rack if it is a single-rack installation.
• The racks are coupled together in multiple-rack installations.
• Only one component is extended at a time. A rack may become unstable if more than one
component is extended for any reason.
Note: If preparing the rails for integrated shipping, follow the same rack installation instructions.
Note: Mounting hardware for square- and round-holed racks is included in the UPS kit.
Page 15
M3 screws
792519-001 Edition 2