Table of Contents
Advertisement
en
Customised setting options
Note: These settings are not saved. If this
preparation programme is selected again,
the pre-configured preparation temperature
will be shown in the display once more.
[
] (my recipe) (manual)
Quick setting mode for customising the
preparation time and temperature setting for
a cooking process.
In function selection mode, button B and
the indicator [
permanently lit. Button G flashes. "00:00"
is shown in the display.
1. Press button F once.
"00:00" flashes in the display.
2. Keep pressing button F until the desired
preparation time is displayed.
3. Press button C once.
"0000" flashes in the display.
4. Keep pressing button C until the desired
preparation temperature is displayed.
5. Press button G to start with the
selected settings.
The appliance heats up the pan until the
target temperature is reached.
Once the target temperature is reached,
the lines go out and the preparation time
is shown in the display. The preparation
process starts automatically.
[
] (recipe 1) /
[
] (recipe 2) –
saving personal preparation
programmes
Depending on the model X "Model
overview and technical data" see page 40
Personal preparation programmes
with customised time and temperature
can be saved under the memory
locations [
[
] (recipe 2).
1. In function selection mode, press button
D once.
The LED [
The pre-configured preparation time is
shown in the display.
34
] (my recipe) are
] (recipe 1) and
] (recipe 1) lights up.
Note: if you have not previously saved any
personal preparation programmes, "00:00"
is shown in the display.
2. Press button F once.
The display flashes. LED 1 (preparation
step 1) lights up in the control panel.
3. Keep pressing button F until the desired
preparation time is displayed.
When button F is briefly pressed, the prepa-
ration time is increased by 1 minute. When
button F is pressed for a longer period, the
preparation time is increased by 10 minutes.
The time increases up to the pre-configured
maximum value and then returns to the
pre-configured minimum value.
4. Press button C once.
The pre-configured preparation temperature
is shown in the display.
Note: if you have not previously saved any
personal preparation programmes, "0000" is
shown in the display.
5. Keep pressing button C until the desired
preparation temperature is displayed.
6. Press and hold button G (>2 seconds)
to save the set values.
In order to programme other preparation
steps, repeat points 2 to 6. Up to 3
preparation steps can be programmed.
The saved preparation programme
[
] (recipe 1) can be selected
as usual via function selection mode
X "Selecting and starting a preparation
programme" see page 28
Note: To save a second personal preparation
programme under [
the same process as described above for
[
] (recipe 1).
To delete a personal preparation
programme, perform the following steps:
1. In function selection mode, press
button D once.
The LED [
The saved preparation time is shown in the
display.
2. Press button F once.
The display flashes. LED 1 (preparation
step 1) lights up in the control panel.
] (recipe 2), use
] (recipe 1) lights up.
Advertisement
Table of Contents
