Table of Contents
Advertisement
Overview
X Fig. A
1 Multi-cooker (basic appliance)
2 Control panel
3 Lid
4 Opening button for the lid
5 Removable steam outlet with window,
2-part
6 Carrying handle
7 Mains connection
8 Pan with non-stick coating
9 Removable lid insert
10 Frying basket with removable handle
11 Steamer insert, 2-part
12 Pan tongs
13 Spatula
14 Ladle
15 Measuring cup
16 Mains cable
17 Operating instructions
18 Recipe book
Control panel
The control panel consists of controls
(buttons) and indicators (LEDs). The
buttons can be used to select the individual
preparation programmes and adopt the
different setting options (e.g. preparation
temperature and time). The settings are
indicated via the illuminated LEDs and/or
the display.
Controls
X Fig. B
Standby
B
Switches the appliance standby
mode on or off.
Set the start time delay
A
The start time delay can be set for
the selected preparation programme.
Select a preparation programme
D
from the list (g)
The individual preparation
programmes are displayed one
after another by repeatedly pressing
button D. The corresponding LED
lights up in the control panel.
Set a customised preparation
C
temperature
For customised adjustment of the
preparation temperature.
Adjust the preparation time
E
The pre-configured preparation time
[
] (medium) for a preparation
programme can be shortened
[
] (short) or lengthened
[
] (long). The corresponding indi-
cator (f) lights up. The corresponding
pre-configured preparation time is
shown in the display (a).
Set a customised preparation time
F
For customised adjustment of the
preparation time.
Confirm the programme
G
Pressing button G starts the
selected preparation programme.
Delete a setting or abort the
H
programme
Pressing button H deletes the
settings or stops a programme that
was previously started.
Indicators
X Fig. D
a Display
Display of the remaining time or the
temperature.
b
(start delay)
Indicates that the start time delay is
enabled. The display (a) shows the time
until the start of the selected preparation
programme.
c Preparation steps / programme
progress
Display of the individual preparation
steps and the programme progress. In
the case of multiple preparation steps
(e.g. the ingredients are added after
heating the deep frying oil), these are
visually indicated by the illumination of
LEDs 1, 2, 3 or 4. An audible signal also
sounds if a subsequent preparation step
is required.
Overview
en
25
Advertisement
Table of Contents
