Connecting Multiple Battery Modules - SolarEdge Home Battery 48V Installation Manual

Connecting Multiple Battery Modules

CAUTION!
Before connecting additional modules, make sure the CB and the LEDs are OFF
on all the modules.
When installing multiple battery modules, connect them in parallel.
CAUTION!
Use only cables recommended by SolarEdge—see Connecting a Single Battery
Module on page 20
Contact SolarEdge or your distributor to order the appropriate cable kit for your
configuration. For cable kits and accessories, see What's in the Package on page 9.
1. Open the side doors of the battery modules.
2. Turn off the power button (soft switch) in all battery modules.
3. Connect the DC, communication and grounding cables between the battery
modules as shown below (example; your actual configuration may differ).
Home Battery 48V Installation Guide MAN-01-00954-1.1
27