SolarEdge Home Battery 48V Installation Manual page 25

24 Connecting a Single Battery Module
6. Use the left grounding terminal to connect the battery module, depending on the
local regulation, to the inverter grounding or to the main grounding.
7. Make sure the Inverter is turned off, then use the upper pair of DC connectors (BAT-
and BAT+) to connect power from the inverter. Note the polarity. Insert the
connectors into this socket until you hear a click.
8. Figure below shows the single battery module with completed connections.
Figure 16: Connnecting the grounding terminal
Figure 17: Connecting power from the inverter
Home Battery 48V Installation Guide MAN-01-00954-1.1