Table of Contents
Advertisement
General Guidelines and Requirements
The battery may be installed in an outdoor or indoor location.
Since the battery must be secured to a wall using the supplied mounting bracket,
the installation location must be adjacent to a wall.
When installed indoors, the battery must not be obstructed by any building
structure, room furniture or equipment.
The battery shall not be exposed to direct sun or rain.
Since the battery has natural convection, the installation site must be clean, dry and
well ventilated.
The installation location must allow easy access to the battery for installation and
maintenance.
The front panel or battery module should not be covered.
Restricted Locations
Do not install the battery at any of following locations:
residential rooms
wall or ceiling niches
entrance/exit areas or below a staircase/passage
environments with humidity and condensed water level of over 90%
earthquake zones where additional safety measures are required
Home Battery 48V Installation Guide MAN-01-00954-1.1
Selecting and Preparing the Installation
Figure 1: Battery Pack Configurations
Site 11
Advertisement
Table of Contents
