Cube TRIKE HYBRID Operator's Manual page 50

Brake inspection:
Brake line routing
Brake line check
Brake pad adjustment
Visual leak test of the brake system.
Check of all fastening screws of the
brake system.
Test of function and correct operation of
front and rear brake.
Shifting inspection:
Shift cable routing
Shift lever or grip shift set-up
End stop set-up
Cable tension adjustment
Shifting function and smooth operation
Check of all fastening screws of the
shifting system.
Chassis inspection:
Basic function and leak check of the
front fork.
Adjustment / smoothness of the headset bearing
Check of all chassis screw connections
Please check o items after inspection
Comments
Place, date
Purchaser signature (legal guardian for children under 18 years of age)
Retailer signature
MTB/ RENNRAD/ TREKKING
Wheel inspection:
Concentricity and centring of the rims,
concentricity and centring of the tyres.
Check of spoke tension and air/tyre pressure.
Correct installation and
xed position of the wheels.
Other inspections:
Adjustment and correct tightening of the
handlebars, handlebar stem and of the crank arms.
Adjustment and correct tightening of the saddle
seatpost, correct tightening of the handles.
Correct installation of the assembly rivet of the chain.
Functioning of lights (if applicable).
Adjustment and correct thightening of the carrier,
mudguards and kickstand (if applicable).
Assembly and correct thightening of other
attachment parts.
When handing over the bicycle:
The purchased object was handed over in a
complete and perfect condition including the
operating manual.
Verbal instructions were given on the safe use of
the bicycle, particularly guidelines on running
in the disc brake - if applicable.
Reference was made to the respective
instructions in the operating manual which
are to be observed.
Reference was made to the warranty obligations
in the CUBE operating manual.