Screw Connections; Which Screw Connections May You Tighten Yourself - Cube TRIKE HYBRID Operator's Manual

17 TRIKE HYBRID
Calculation example no. 3
Unladen weight of the Trike Family Hybrid 750:
+ 75 kg
Actual cyclist weight:
+ 80 kg
Actual payload of the box:
+ 44 kg
Intrinsic weight of the carrier:
+ Approx. 1 kg
Actual payload of the carrier:
+ 20 kg
Actual total weight of the Trike Family Hybrid
750:
= 220 kg (permissible total weight reached)
Result/conclusion on calculation example no. 3:
In this case, the actual total weight (220 kg) equals
the permissible total weight. If the (lower) cyclist
weight permits, the box and carrier can each be
loaded with the full weight of their maximum per‐
mitted payload.
You may use the Trike Hybrid in this way
Important: The unladen weight of the carrier
(as a retrofitted attachment) must be taken into
account.

3.5 Screw connections

3.5.1 Which screw connections may
you tighten yourself?
DANGER
Danger if work is carried out
improperly!
If you tamper with bolts or connec‐
tions not mentioned here, you may
unknowingly damage your Trike
Hybrid or even impair its construc‐
tion/stability.
This can lead to unforeseeable dan‐
gerous situations.
−
If, e.g. when checking your
Trike Hybrid, you discover that
bolts have loosened that are
not listed in the following over‐
view, consult your bicycle dealer
immediately.
−
Do not use your Trike Hybrid
until the screw connections
have been tightened by your
bicycle dealer.
NOTICE
Screw connections, that are not in
the following overview may only
be tightened/fixed by a specialist
bicycle dealer.
You may retighten the following screw connections
yourself – under consideration of the corresponding
torques – if the screw connection has loosened:
Part Connection
Seat clamp
Seat post Height adjustment of the seat post
Seat post clamp on the frame
Cable guide screw