Use Child Seat - Cube TRIKE HYBRID Operator's Manual

7.9.5

Use child seat

1.
Place the child in the middle seat (when using
as a single-seater) or in one of the outer seats
(when using as a two-seater).
Fig. 34: Left: single-seater - right: two-seater
��
If you are using the child seat as a single-
seater, pull the two outer free belts as
tight as possible. Loose hanging belts
can pose a safety risk to the child (risk of
strangulation!).
2. Guide the shoulder straps of the harness system
over the child's shoulders. The harness buckle is
located between the child's legs.
3. To close the belt system, insert the two belt
tongues together into the belt buckle. The belt
tongues audibly engages in the belt buckle.
Fig. 35: Insert both belt tongues into the belt buckle
4.
Check the proper fit of the shoulder straps.
If necessary, adjust the shoulder strap to the
right length for your child.
NOTICE
Depending on the size of the
child to be strapped in, the belt
position can also be changed.
Contact a CUBE dealer to
change the belt position.
5. To open the belt system, proceed as follows:
Press the two release buttons at the top and
bottom of the buckle simultaneously.
Fig. 36: Open belt system
TRIKE HYBRID 40