Removing/Attaching The Soft Top - Cube TRIKE HYBRID Operator's Manual

5.
To lock the soft top in the closed position, press
down the front of the soft top with a little pres‐
sure so that it audibly engages on both sides.
Click
Fig. 26: closed soft top
7.9.3 Removing/attaching the soft
top
NOTICE
You can remove the soft top to clean
the interior of the box. However,
always note that use of the Trike
Hybrid is only permitted with the soft
top mounted and fully closed.
To remove the soft top:
1.
Fold up the soft top ⮫
the soft top" on page 36 .
2. Hold down the safety button on the cotter-pin
and pull it out of its guide.
Fig. 27: Cotter-pin with safety button
3.
Unhook the gas strut.
Click
Chapter 7.9.1 "Opening
4.
Lift the soft top out of the hinges on both sides
of the box.
Fig. 28: Lift the soft top out of the hinges
Fig. 29: Soft top lifted
To reattach the soft top:
1. Hook the soft top into the hinges on both sides
of the box.
2.
Re-attach the gas strut.
3.
Push the cotter-pin into its guide as far as it
will go. Make sure that the safety button on
the cotter-pin pops out and locks the cotter-pin
securely.
Fig. 30: Inserted cotter-pin
TRIKE HYBRID 38