Safety Messages; Mechanical Installation - Emerson Rosemount 2110 Reference Manual

Reference Manual
00809-0100-4029, Rev AA
July 2005
S 2
ECTION
Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-1
Mechanical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-1
Correct Fork Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-2
Electrical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-4

Safety Messages

Procedures and instructions in this manual may require special precautions to ensure the
safety of the personnel performing the operations. Information that raises potential safety
issues is indicated by a caution symbol (
when a surface is hot and care must be taken to award possible burns. If there is a risk of an
electrical shock the (
beginning of each section before performing an operation preceded by this symbol.

Mechanical Installation

Figure 2-1. Sealing
NPT, BSPT (R)
PTFE (Teflon)
BSPP (G1)
Gasket
Seal (supplied in
02100-1020-0001)
www.rosemount.com
I
NSTALLATION
)symbol is used. Refer to the safety messages listed at the
Tri-Clamp
). The external hot surface symbol (
Figure 2-2. Tighten the Switch
Rosemount 2110
)is used