Disassembly Of Dust Cover - Bosch Rexroth VFC 610 Series Operating Instructions Manual

Brake Chopper

11.4.2 Disassembly of Dust Cover

Fig. 11-2: Disassembly of dust cover
Step 1: Press two buckles as circles indicating in the above figure
●
Step 2: Hold dust cover and pull it out horizontally from the mounting plate
●
Remove the dust cover when use the brake chopper for the first
time, install an operating panel to set the related parameters, then
disassembly the operating panel and reinstall the dust cover.
DOK-RCON04-VFC*BRAKE**-IT01-EN-P
Bosch Rexroth AG
Maintenance
55/65