Digital Signal Internal Wiring - Bosch Rexroth VFC 610 Series Operating Instructions Manual

Bosch Rexroth AG
Brake Chopper Wiring

6.3.3 Digital Signal Internal Wiring

①
Use of terminal TG
②
Use of terminal Reset
Fig. 6-8: Wiring of terminals TG and Reset
Terminals Reset and TG are using the switching signals. Do not need
external power supply.
Fig. 6-9: Wiring of terminals IN and OUT
Terminals IN+, IN-, OUT+ and OUT- are ONLY used in Master / Slave
control mode.
32/65
Brake Chopper
DOK-RCON04-VFC*BRAKE**-IT01-EN-P