Brake Chopper
8.1.2 Operating Descriptions
Fig. 8-2: Operating mode
8.1.3 Fast Access to Parameters with Button Combinations
Brake chopper provides fast access to parameters within a parameter group
with '<Func> + <▲>' or '<Func> + <▼>' combinations.
Press '<Func> + <▲>' once, the blinking bit move one bit to left.
●
Press '<Func> + <▼>' once, the blinking bit move one bit to right.
●
Example:
Change the value of parameter b0.20 from '0' to '1000', perform the following
steps.
Step 1: press '<Func> + <▲>' or '<Func> + <▼> to active the fast access func-
●
tion, '0' is displayed.
Step 2: press '<Func> + <▲>' for three times, move three bits to the left, '0000'
●
is displayed and the left-most '0' is blinking.
Step 3: press <▲> button to change left-most '0' to '1', then '1000' is displayed
●
and '1' is blinking.
Step 4: press <Set> button to save the setting. The screen will return to previ-
●
ous menu and parameter 'b0.10' will be displayed.
DOK-RCON04-VFC*BRAKE**-IT01-EN-P
Bosch Rexroth AG
Operating Panel and Dust Cover
37/65