Bosch Rexroth VFC 610 Series Operating Instructions Manual page 31

Brake Chopper
Make sure that terminals (+), (-) of frequency converter are con-
●
nected to the corresponding terminals P, N of brake chopper re-
spectively. Incorrect connection may damage the brake chopper.
Please connect to frequency converter directly or install a termi-
●
nal block.
The master / slave control mode of the brake chopper supports
●
the following two connections, which currently supports up to
three brake choppers in parallel.
– Two devices: master + slave
– Three devices: master + slave + slave
DOK-RCON04-VFC*BRAKE**-IT01-EN-P
Bosch Rexroth AG
Brake Chopper Wiring
25/65