Bosch Rexroth AG
Operating Panel and Dust Cover
Setting [U2.02] to '1', or
●
Pressing Func button with Loc button for longer than 3 s.
●
Panel can be unlocked by the following ways:
Setting [U2.02] to '0' (only in communication mode), or
●
Pressing Func button with Loc button for longer than 3 s.
●
8.2.2 Operating Example
Please follow the steps below to set parameter [b0.10] to '1: Restore to default
settings' through LCD panel.
1. Press Func button.
2. Rotate Rotary encoder to select parameter group b0.
3. Press Rotary encoder and rotate it to select parameter b0.10.
4. Press Rotary encoder and rotate it to select parameter value '1: Restore to
default settings'.
5. Press Rotary encoder to finish setting.
8.3 Dust Cover
Fig. 8-4: Dust Cover
40/65
Brake Chopper
DOK-RCON04-VFC*BRAKE**-IT01-EN-P