Bosch Rexroth AG
Brake Chopper Wiring
6.3.2 Control Terminals
Control terminals figure
Fig. 6-7: Control circuit terminals
CAUTION
The brake chopper might be damaged!
Please make sure that the power supply of the brake chopper has been switch-
ed off before plugging or unplugging the connector.
The terminal block is ONLY for wiring convenience, which CANNOT
be used for fixing the cables. Additional measures need to be taken
by users for cable fixing purpose.
30/65
Brake Chopper
DOK-RCON04-VFC*BRAKE**-IT01-EN-P