Separate The Management And Production Networks - Dell S5000 Series Getting Started Manual

Next steps
See the Remote Hardware Management CLI Reference Guide for more information.

Separate the management and production networks

About this task
It is highly recommended to separate the management network and the production network for security reasons.
Steps
1. Connect the management network cable to the LAN management port.
Connect the cable to the Ethernet port 0 of the PEB or the PEBS.
2. Connect the production network cable to a second Ethernet port.
3. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
4. Configure the BMC network settings to hide the management port from the host OS:
a. From the Configuration tab, click BMC Settings > Network to display the Network Settings page.
b. Set the Hide Management Port option and click Apply.
Initial Configuration 23