Dell PowerEdge SC1435 Update Manual

Information Update
This document provides updated information for your system.

Updated Memory Module Installation Guidelines

To ensure optimal performance of your system, observe the following guidelines when configuring
your system memory.
• Use only 667-MHz registered parity DDR-II memory modules.
• Memory modules must be installed in pairs, beginning with DIMM1 and DIMM2 (processor 1),
and DIMM5 and DIMM6 (processor 2).
• The memory modules must be identical in speed and technology. The DIMMs in each pair must be
the same size.

Update to Processor Installation

During processor installation or replacement, be sure to position your finger or thumb firmly on the
socket release lever and control the lever when releasing it so that the lever does not spring up suddenly.
The lever locks down the processor with considerable force to ensure a good socket connection. Releasing
the lever without control can cause the lever to spring up suddenly and forcefully.
____________________
Information in this document is subject to change without notice.
© 2006 Dell Inc. All rights reserved. Printed in Malaysia.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
November 2006