Dell S5000 Series Getting Started Manual page 15

3. Configure the embedded management controller's network settings:
a. Click Query Device. The current network settings appear in the Network Configuration box.
Figure 14. Device Setup screen
b. To configure a static IP address, proceed as follows:
i. Complete the following fields:
● Super user login: super
● Super user password: pass
● IP autoconfiguration: None
● IP address, Subnet Mask, and Gateway: to be completed according to the network settings.
Figure 15. Device Setup Screen - Configuration and Authentication
ii. Click Setup Device.
NOTE: Although the super user password can be changed using the tool, it is advised to log in to the Server
Hardware Console for the first time with the default super user login and password. The default super user login
and password can be changed by the customer once installation is completed.
Connecting the Server 15